Configuration of Scan to Home (ApeosPort Series Models Only)
357
Scanner Environment Settings
9
5) Select the [Enabled] check box under [Status].
6) Click [Friendly Name] and enter the description of the job template with up to 127
single-byte characters as necessary, and the click [Apply].
7) Click [Template Name] and set the job template name with up to 24 single-byte
characters as necessary, and then click [Apply].
The name specified here is displayed in the list of the job templates for the Scan to
Home service. When a job template name is not specified, the template name is
displayed as "@S2HOME".
3 Specify the storage location (directory).
îš„ Transferring files to a directory specified by a login user using LDAP (directory
service) information
1) Select the [LDAP Query] check box for [Determine Home Directory].
The folder specified for [homeDirectory] of a user profile which is registered with the
LDAP (user information management) server is defined as a storage location by default.
Note • To change a storage location, select [LDAP Mapping for Home Directory] and enter the property
name, which a storage location is set, in [Home], and then select [Apply].
• The [LDAP User Mappings] screen which is displayed by clicking [LDAP Mapping for Home Directory]
is identical with the screen displayed by selecting [Properties] > [Connectivity] > [Protocols] > [LDAP]
> [LDAP User Mappings].
îš„ Transferring files to a directory specified by CentreWare Internet Services without
using LDAP (directory service) information
1) Select the [No LDAP Query] check box for [Determine Home Directory].
2) Enter a directory name of the storage location in [Network Home Path].
Specify a folder name using UNC format (for example: \\server name\shared
name\folder name\folder name2).
4 To specify a subdirectory under the directory specified in step 3, perform the following
procedure:
1) Select [Automatically Create Subdirectory] check box, and enter a subdirectory name in
[Subdirectory] to specify a subdirectory.
2) When you use the login user name as a subdirectory name, select [Append User Name
to Path] check box.
3) If you select the [Append User Name to Path] check box, selecting the [Automatically
Create "User Name" directory if one does not exist] check box creates a subdirectory
with a user name automatically when the user name directory does not exist.
4) When you select both the [Automatically Create Subdirectory] and [Append User Name
to Path] check boxes, specify which directory, subdirectory or subdirectory with a user
name, becomes a subdirectory in [Directory Structure].
5 To add a domain name to a login user name, select the [Enabled] check box for [Use
Domain for Authenticated User].
6 Click [Apply].
Step 5 Configuration on the Computer
Create a destination folder on your computer and set it as a shared folder, and then set write
rights on the folder.
Note • To use SMB on Mac OS X, set [Windows Sharing] to [On] in the [Service] tab of [Sharing] under
[System Preferences].
To Next Page
Loading...
Need help?
General
