Trouble during Copying
455
Problem Solving
15
Unable to copy
with the specified
size.
The document glass or the
document cover is dirty.
Clean the document glass or the document
cover.
Refer to "Cleaning Document Cover and Document
Glass (for Duplex Automatic Document Feeder B1-C)"
(P.89).
The document is a
transparent type such as a
transparency film.
Place a white sheet of paper on top of the
document when copying.
The document is misaligned. Load the document correctly.
Refer to "3 Copy" > "Copying Procedure" in the User
Guide.
The document guides on the
document feeder are not set
in the correct positions.
Load the document correctly, and align the
document guides to the document.
Refer to "3 Copy" > "Copying Procedure" in the User
Guide.
The document is a non-
standard size.
Specify the document size, and then copy.
Refer to "3 Copy" > "Copying Procedure" in the User
Guide.
The document is folded. Flatten the curl and load the document
again.
Refer to "3 Copy" > "Copying Procedure" in the User
Guide.
Unable to copy in
color.
[Output Color] is set to [Black
& White].
Set [Output Color] to [Auto Detect] or [Color].
Refer to "3 Copy" > "Copy" > "Output Color (Selecting
the Color for Copying)" in the User Guide.
The document
edges are missing
on the copy.
The document is larger than
the printable area.
Adjust [Reduce/Enlarge] to copy the
document smaller.
Outputs are not
stapled.
The Finisher is not attached. The Finisher is required to staple. Install the
Finisher, or change the print option settings
to cancel stapling.
The number of pages to be
stapled exceeds the
maximum number for
stapling.
You cannot staple more than 50 pages.
Reduce the number of pages to 50 or fewer.
Symptom Cause Remedy
To Next Page
Loading...
Need help?
General
