15 Problem Solving
602
Problem Solving
15
7 With holding the tabs, return the cartridge to
the original position, and then gently push the
cartridge in until it clicks into place.
8 Repeat steps 3 to 7 for the cartridge at the back of the unit.
9 Return the unit to the original position.
10 Close the finisher front cover.
Note • If the finisher front cover is not completely closed, a message will appear and the machine remains
paused.
If you cannot remove jammed staples even after you perform the above procedure, contact
our Customer Support Center.
To Next Page
Loading...
