Replacing Consumables
77
Maintenance
3
1 Make sure that the machine is not operating,
and open the finisher front cover.
2 Grasp the handle and pull out the staple
cartridge holder to the right, towards you.
3 Take the staple cartridge out of the finisher.
Note • The staple cartridge is firmly inserted. A slight
force is required to pull the cartridge out of
the finisher.
4 Pinch both sides of the empty staple case with
your fingers (1), and remove the staple case
from the cartridge (2).
5 Insert the front side of the new staple case into
the staple cartridge (1), and then push the rear
side into the cartridge (2).
To Next Page
Loading...
