EasyManuals Logo

Fuji Xerox DocuCentre-V 4070 User Manual

Fuji Xerox DocuCentre-V 4070
719 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #633 background imageLoading...
Page #633 background image
PCL Emulation
631
Appendix
16
PCL Settings List
The following table describes the parameters that can be set with the mode menu.
Parameter Item No. Value
Paper tray 201 Sets the paper tray to be used for printing.
[0] (Default) : Auto
[1] : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5
[6] : Tray 6 (HCF)
Important • When Trays 1 to 4, Tray 6 is selected, the paper size is determined by the size
of paper loaded in the tray, and thus [Paper Size] cannot be set.
Note • When [Auto] is selected and paper of the same size in the same orientation in
multiple trays is loaded, paper will be fed in the order of Tray 1 J Tray 2 J
Tray 3 J Tray 4 J Tray 6. If paper of the same size is loaded in multiple trays
but in different orientations, feeding of the paper loaded in the landscape
orientation is prioritized.
Auto size 202 Sets the default paper size. Only available when [Paper Tray] is set to [Auto].
Only cut sheet can be set.
[3] : A3
[4] (Default) : A4
[5] : A5
[14] : B4
[15] : B5
[21] : 8.5 × 14"
[22] : 8.5 × 13"
[23] (Default) : 8.5 × 11"
[24] : 11 × 17"
[25] : Custom Size
[30] : 8K
Important • When Trays 1 to 4, Tray 6 is selected, [Paper Size] cannot be set. The paper
size loaded in the specified tray is displayed.
Note • When Trays 1 to 4, Tray 6 is selected, the paper size is determined by the size
of paper loaded in the tray, and thus [Paper Size] cannot be set.
•Depending on the combination of [Original Size] and [Paper Size], [?] may be
displayed for the magnification. In this case, the document is printed at a
scale of 100%.
Bypass size 203 Sets the default paper size. Only available when [Paper Tray] is set to [Auto].
Only cut sheet can be set.
[3] : A3
[4] (Default) : A4
[5] : A5
[14] : B4
[15] : B5
[21] : 8.5 × 14"
[22] : 8.5 × 13"
[23] (Default) : 8.5 × 11"
[24] : 11 × 17"
[25] : Custom Size
Output
destination
204 Sets the output tray for the printouts.
[0] (Default) : Center Tray - Lower
[1] : Side Tray (optional)
[2] : Center Tray - Upper (optional)
[80] : Right Middle Tray (optional)
[81] : Right Top Tray (optional)

Table of Contents

Other manuals for Fuji Xerox DocuCentre-V 4070

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-V 4070 and is the answer not in the manual?

Fuji Xerox DocuCentre-V 4070 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre-V 4070
CategoryAll in One Printer
LanguageEnglish

Related product manuals