Fax Service Settings
263
Tools
5
Enter Once Only
Allows the Broadcast Send. No need to re-enter the recipient.
Enter Twice
Allows the Broadcast Send. Re-entering the recipient is required.
Broadcast Disabled
No Broadcast Send is allowed.
Re-enter Speed Dial Recipients
This setting is required when you selected [Enter Twice] for [Re-enter Recipients]. Select how
to re-enter a recipient after the first entry.
Enter Once Only
No need to re-enter the recipient.
Enter Twice
Use the Speed Dial feature to re-enter the recipient.
Re-enter Fax Number or E-mail
You cannot enter the speed dial when you re-enter the number or address. Use the fax
number, SIP user ID (Sign-in Name), phone number or SIP user name for IP fax, or e-mail
address to enter the recipient.
Re-enter Group Recipients
Specifies whether you need to re-enter group addresses after entering a group address.
Group Send Disabled
No group recipient is allowed.
Enter Once Only
No need to re-enter the group recipient.
Enter Twice
Re-entering the group recipient is required.
Broadcast Checkbox on 1st Tab
Specify whether or not to show the [Enable Broadcast] checkbox in the [Fax/Internet Fax]
screen to explicitly express broadcast directions.
Chain Dial
Allows you to combine the fax numbers registered in one-touch button, speed dial, and
address book respectively and the numbers entered using the numeric keypad to specify as
one recipient. You can select from [No] or [Yes].
Note • This item is available when [Type 1] is set for [Address Book Type] under [Tools] > [Address Book
Settings].
Manual Redial List - Saved Entries
Specify the number of redial destinations saved.
Manual Redial List - Dial Mode
Specify the destination type saved as a redial destination number.
When you deselect all the check boxes, the Redial feature becomes disabled.
To Next Page
Loading...
Need help?
General
