Fuji Xerox DocuCentre-V C3375 Administrator's Guide

16 Appendix
660
Appendix
16
9 Select [Name], and select [Change Settings].
10 Enter the type name, and then select [Save].
Note • We recommend you to use a name such as "Single Fold Plain" that allows you to know what the
content is.
11 Select the fold type, and then select [Change Settings].
For details on making each fold adjustment, refer to the following sections.
- For single fold, refer to "Single Fold Position Adjustment" (P.660).
- For booklet, refer to "Booklet Position Adjustment" (P.661).
- For C fold, refer to "C Fold Position Adjustment" (P.663).
- For Z fold, refer to "Z Fold Position Adjustment" (P.664).
- For Z fold half sheet, refer to "Z Fold Half Sheet Position Adjustment" (P.665).
Single Fold Position Adjustment
Adjust the single fold position.
1 Select [Single Fold], and then select [Change
Settings].
2 Specify [Sheets to be folded], and then select
[Sample Printout].
3 Select the tray in which you loaded paper, and
press the <Start> button.
The sample is printed.
4 Select [Close].
5 Check the sample printout, measuring the misaligned amounts.

Fuji Xerox DocuCentre-V C3375 Specifications

General

Print Resolution	1200 x 2400 dpi
Duplex Printing	Yes
Memory	2 GB
Hard Disk	160 GB
Warm-up Time	30 seconds or less
Scan Resolution	600 x 600 dpi
Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Max Paper Size	A3
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB, Ethernet
Paper Size	A3, A4, A5, B4, B5, Custom sizes
Scan Speed	70 ipm (A4, duplex)
Fax Resolution	400 x 400 dpi