Specifications
651
Appendix
16
*1 : For punching, Punch Unit 2/4H CD1 (optional) or Punch Unit US 2/3H CD1 (optional) is required.
*2 : You can switch the number of punch holes between 2 holes and 4 holes with the Punch Unit 2/4H CD1 (optional), and US 2
holes and US 3 holes with the Punch Unit US 2/3H CD1 (optional).
*3 : The Folder Unit CD1 (optional) is required.
*4 : This is for the Folder Unit CD1 (optional). The another power source is required when the Folder Unit CD1 is installed.
*5 : When the Transport Unit H1 (optional) is installed and the extension tray is fully extended.
Folder Unit CD1 (optional)
Punch
*1, *2
Number of holes : 2-hole/4-hole punch or 2-hole/3-hole punch (US
Specifications)
Paper size : A3, 11 x 17", B4, A4
*
, A4 , 8.5 x 11", 8.5 x 11" , B5 ,
7.25 x 10.5" , 8 x 10", 8 x 10" , 16K ,
Cover A4 , 9 x 11" , 215 x 315 mm, 8.5 x 13",
Legal (8.5 x 14"), 11 x 15", 8K
* : The 3 holes (optional) are not available.
Paper weight : 52 - 200 gsm
Important • When using P paper
Booklet Finishing
Sheets per subset : 16 sheets (Fold + Staple)
*1
,
(Maximum) 5 sheets (Fold + Unstaple),
1 sheet (Single Fold)
Paper size
Maximum : SRA3 (320 x 450 mm), 12 x 18" (305 x 457 mm)
Minimum : B5
Paper weight : 60 - 105 gsm (Fold + Staple)
*2*3
,
60 - 105 gsm (Fold + Unstaple)
*3
,
60 - 105 gsm (Single Fold)
*1 : The capacity varies depending on how heavy the cover is. Booklets may not be tightly
closed depending on the size or type of the paper.
*2 : Covers can be up to 256 gsm (Extra-HW) for saddle staple during printing.
*3 : Printed covers can be up to 169 gsm (Heavyweight) for middle-fold or saddle staple during
copying, while blank covers can be up to 256 gsm (Extra-HW).
Important • When using P paper
Folding
*3
Z-Fold
Paper size: A3, B4, 11 x 17"
Paper weight: 90 gsm or less
C-Fold
Paper size: A4, Letter (8.5 x 11")
Paper weight: 90 gsm or less
Power Supply AC 220 - 240 V ±10% / 110 V ±10%, 0.5 A/0.9 A / for both 50/60 Hz
Maximum Power
Consumption
*4
100 W
Dimensions Width 790 x Depth 589 x Height 1,056 mm
Width 1,025 x Depth 726 x Height 1,056 mm (with the Fold Unit CD1 and
a punch unit)
Weight
*5
61kg
115 kg (with the Fold Unit CD1 and a punch unit)
Space Requirement (with
the main unit)
Width 1,836 x Depth 699 mm (Main unit + C3 Finisher with Booklet
Maker)
Width 2,071 x Depth 727 mm (Main unit + C3 Finisher with Booklet Maker
+ Fold Unit CD1)
Paper Size Z Fold Half Sheet : A3, 11 x 17", B4
Tri-fold : A4, Letter
To Next Page
Loading...
Need help?
General
