Fuji Xerox DocuCentre-V C3375 Administrator's Guide

16 Appendix
668
Appendix
16
6 Select the paper type, and then select [Close].
7 Select [Print Sample].
8 Select the paper size, load paper of that size in
Tray 5 (Bypass), and then select [1 Sided] or [2
Sided].
9 Press the <Start> button.
The print sample will be printed.
Note • “Side 1” will be printed on the top right of the Side 1
sample, and “Side 2” will be printed on the top right
of the Side 2 sample.
• When the paper size is A4, B4, or 8.5 × 11", the
sample will be printed on two sheets.
10 Check the print sample, and take a note of the value (-5 to +10) printed on the left side of
the most-successfully printed row.
Note • When [2 Sided] is selected, do the same for both the Side 1 sample and the Side 2 sample.
-5
-4
-3
-2
-1
0
+1
+2
+3
+4
+5
+6
+7
+8
+9
+10
Side1

Fuji Xerox DocuCentre-V C3375 Specifications

General

Print Resolution	1200 x 2400 dpi
Duplex Printing	Yes
Memory	2 GB
Hard Disk	160 GB
Warm-up Time	30 seconds or less
Scan Resolution	600 x 600 dpi
Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Max Paper Size	A3
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB, Ethernet
Paper Size	A3, A4, A5, B4, B5, Custom sizes
Scan Speed	70 ipm (A4, duplex)
Fax Resolution	400 x 400 dpi