Output Format
169
Copy
3
Folds copies so that the image is printed outside after you select [Z Fold], [C Fold], or
[Single Fold].
Preset Repeat Image (Making Multiple Copies on a Single Sheet)
This feature allows you to repeatedly copy one original onto equally divided areas according
to the specified number of copies.
You can select the number of the times the original is copied onto one sheet from [2 Times],
[4 Times], or [8 Times].
Note • When you select an option other than [Auto %] in [Reduce/Enlarge], image loss may occur
depending on the image size of the document.
1 Select [Preset Repeat Image].
2 Select any option.
Off
Disables this feature.
2 Times
Makes two copies of the document image on a single sheet of paper.
4 Times
Makes four copies of the document image on a single sheet of paper.
8 Times
Makes eight copies of the document image on a single sheet of paper.
Transparency Options (Inserting Blank Sheets between Transparencies)
This feature allows you to insert blank separators between output transparency sheets. At
the same time, you can make copies for handouts.
Important • Using transparency sheets for color (with white border) may cause a malfunction or paper jam.
Note • When loading A4 size transparencies on Tray 5 (Bypass), we recommend that you load them in
portrait orientation.
To Next Page
Loading...
Need help?
General
