Layout Adjustment
369
Scan
5
Original Orientation
Set the orientation of the loaded document to specify the top edge of the document.
Note • If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.
Upright Images
Select this option when placing the top edge of the document against the top side of the
document glass or document feeder.
Sideways Images
Select this option when placing the top edge of the document against the left side of the
document glass or document feeder. Always select [Sideways Images] when the top of
the document is placed facing the left side (horizontal text).
Reduce/Enlarge (Specifying a Scanning Ratio)
This feature allows you to set the scanning ratio for the document to be scanned.
Note • When [Searchable Text] is set to [Searchable] and the [Specific Color] check box is selected on the
[File Format] screen, [Reduce/Enlarge] is [100%] and cannot be changed.
1 Select [Reduce/Enlarge].
2 Select any option.
Proportional %
Allows you to select a preset ratio, or enter a value in the range from 25 to 400% in 1%
increments.
Use the numeric keypad or [+] and [-] to enter a value.
Variable %
Enter the scanning ratio. Specifying "100%" scans at the same image size as the original
document.
Preset %
Select from preset ratios.
You can change the default values of scan ratios other than [100%]. For information on the settings, refer to "5 Tools" >
"Scan Service Settings" > "Reduce/Enlarge Presets" in the Administrator Guide.
To Next Page
Loading...
Need help?
General
