11 Job Status
448
Job Status
11
Note • When the passcode is set, enter the user ID and select [Next]. Then, enter the passcode and select
[Enter].
• While a user is authenticated, the <Log In/Out> button lights up on the control panel.
• To log out of the machine, press the <Log In/Out> button on the control panel.
3 Select [Charge Print].
4 Select the user to be checked, and select [Job
List].
Note • Select [Refresh] to display the updated
information.
• You can enter a user ID in [Go to] using the
numeric keypad to display the user ID at the
top of the list.
5 Enter the passcode, and select [Confirm].
Note • If the passcode is not set, the passcode entry
screen does not appear.
6 Select the job to be printed or deleted.
Note • You can select up to 100 files simultaneously
to print or delete the files. If you select
multiple files, they are printed in the selected
order.
• Stored files can be displayed in a list or
thumbnailed view. You can also preview the
files.
• The image of a direct print job from the USB
port is not previewed.
• You can set whether or not to display detailed information in the list screen of the stored files. For
more information, refer to "5 Tools" > "Stored File Settings" > "Display Details of Stored Print Job" in
the Administrator Guide.
• When the booklet layout is set using a printer driver, the icon for booklet is displayed.
7 Select any option.
8 When printing, specify the number of print sets using the numeric keypad.
Delete
Deletes the Charge Print job.
Refer to "When [Delete] is Selected" (P.449).
Preview
Displays the previewed image on the first page of the selected job.
Note • If you select multiple documents, [Preview] cannot be selected.
Refer to "When [Preview] is Selected" (P.449).
Print Quantity
Specify the number of print sets using the numeric keypad.
Print
Prints the Charge Print job. After printing, the job is deleted.
Refer to "When [Print] is Selected" (P.450).
To Next Page
Loading...
Need help?
General
