2.2 Installing the Print Driver and Setting Up the USB Port 27
Setting Up the USB Port
1. Make sure that the printer is off, and connect the USB cable.
2. Switch on the printer.
When the following dialog box appears, click [Next]. The computer automatically
detects the new hardware and installs necessary software. This concludes setup of
the USB port.
3. From the [start] menu, click [Printers and Faxes] (or [Settings] > [Printers] depending
on the OS).
4. Click the icon of the printer, and then select [Properties] from the [File] menu.
5. Click the [Ports] tab, then make sure that the USB port is selected and click [OK].
To Next Page
Loading...
