16 2 Setting the HP-GL Mode
File Size
Sets the Client-Created file size.
Candidate values are shown below.
[Auto] (default)
[Output]
This is the same size as that set in [Output Size].
[A0] [A1] [A2] [A3] [A4] [A5] [B0] [B1] [B2] [B3] [B4] [B5]
The [Zoom Mode], [Area Determine], and [Paper Margin] settings of [Print Control] are
enabled.
Note
• If [Auto] is not selected, the [Auto Layout] setting switches to [Off].
• If [Auto] is not selected, the [Zoom Mode] setting switches to [Output Size].
Coordinate Rotate
Sets the paper orientation for printing.
Candidate values are shown below.
[0] (default)
Paper orientation is set as landscape.
[90]
Paper orientation is set as portrait.
Gradation Mode
Sets the gradation mode for printing.
Candidate values are shown below.
[Grayscale] (default)
[Black Pen]
Auto Layout
Turns on or off the auto layout function.
Candidate values are shown below.
[On] (default)
[Off]
Note
• [On] only appears in the display when [Auto] is selected in [File Size].
• When [Off] is selected, the [Zoom Mode] setting changes to [Output Size].
Palette Setup
Specifies the palette to be used.
Candidate values are shown below.
[Command] (default)
[Stored Prog.]
To Next Page
Loading...
