8 1 Using Emulation
Switching Between Print Languages
This printer supports multi-emulation, allowing you to switch between print languages.
There are three methods of switching between print languages.
Switching by Commands
Commands for switching between supported print languages are provided. This printer
switches to the supported print language when it receives the respective command.
Automatic Switching
This printer analyzes the data received by the host interface to identify the print language
to be used. It then switches to the identified print language automatically.
Interface-dependent
Set a print language for each host interface using the control panel. The printer switches to
the supported print language to match the host interface that receives the data.
Mode Menu Screen
The screen is used to set items specific to HP-GL and HP-GL/2 emulation modes. Press
the <Settings> button to display the HP-GL mode menu screen and then select [HPGL] for
[Language Emulation].
Refer to
• HP-GL mode menu items: “2 Setting the HP-GL Mode” (P. 13)
To Next Page
Loading...
Need help?
General
