104 6 Troubleshooting
5. Grasp the green part of the belt unit with
your finger and lower the belt unit until it
stops.
6. If paper is jammed here, remove it. Confirm
that no paper scraps remain inside the
printer.
7. Return the belt unit to its original position.
8. Close the front cover.
Important
• When closing the front cover, take care not to pinch
your fingers between the cover (top, bottom, right side,
left side) and the printer.
9. Return the paper tray to the printer.
Important
• When pushing the tray, take care not to pinch your
fingers between the tray and the printer.
To Next Page
Loading...
