46 3 Print
The following procedure explains how to load envelopes in Tray 1. This example uses a
type of envelope with the flap on a long edge.
Important
• You cannot print on the flap side of the envelope.
• Envelopes can wrinkle or print poorly depending on type of paper used. For details about the usable
envelope, refer to "Supported Paper" (P. 71).
1. Load envelopes with the address side
facing up and the flap closed.
2. Slide the paper guides to the size of the envelope.
Printing on Envelopes
To print on envelopes using the PCL print driver, display the [Paper / Output] tab. This
section explains the procedure using WordPad on Windows XP as an example.
Note
• The way to display the printer properties dialog box differs depending on the application software being
used. Refer to the manual that came with your application.
1. On the [File] menu, click [Print].
2. Select the printer from the [Select Printer] list box, and click [Preferences].
3. The [Paper / Output] tab appears.
From [Paper Tray], select [Tray 1] or [Manual Feeder].
4. Select the appropriate paper type from [Paper Type].
4
3
To Next Page
Loading...
Need help?
General
