90 5 Control Panel Menus
USB Settings
Specifies the settings for the USB interface.
Note
• You need to restart the printer to activate the new settings. After making the settings, turn the printer off
and on.
Adobe Protocol Sets the PostScript communication protocol.
• [Auto] (default)
Automatically detects the PostScript communication protocol.
• [Standard]
Select this when the communication protocol is in ASCII format.
•[BCP]
Select this when the communication protocol is in binary format.
•[TBCP]
Select this when the communication protocol are both in ASCII and binary
formats and switches between the two using control codes.
•[Binary]
Select this when no special processing is required for data.
Note
• Select an appropriate option according to the data format specified on your
print driver.
• [Adobe Protocol] is valid only when printing in PostScript.
Item Description
Port Status Sets whether or not to enable the USB port.
• [Enable] (default)
• [Disable]
Adobe Protocol Sets the PostScript communication protocol.
• [TBCP] (default)
Select this when the communication protocol are both in ASCII and binary
formats and switches between the two using control codes.
•[Binary]
Select this when no special processing is required for data.
• [Auto]
Automatically detects the PostScript communication protocol.
• [Standard]
Select this when the communication protocol is in ASCII format.
•[BCP]
Select this when the communication protocol is in binary format.
Note
• Select an appropriate option according to the data format specified on your
print driver.
• [Adobe Protocol] is valid only when printing in PostScript.
Item Description
To Next Page
Loading...
