108 6 Troubleshooting
5. Raise the transfer belt unit until it locks into
place.
6. Close the front cover.
Paper Jams in Tray 2 (Optional 250 Sheet Feeder)
1. Open the trays until you find the jammed
paper.
Note
• Paper in the sheet feeder feeds to the printer from the
front of the trays. Paper jammed in the lower tray can
block the upper tray of the feeder or the paper tray in
the printer, preventing you from opening them. Look
for the jammed paper sequentially, starting with the
lowest tray.
2. Remove all jammed or creased paper from
the tray.
3. Carefully pull out any paper jammed in the
tray so that you avoid tearing it. If the paper
is torn, confirm that there are no scraps of
paper remaining inside the printer.
To Next Page
Loading...
Need help?
General
