168 7 Maintenance
12. After entering the values, press the <Eject/
Set> button to confirm your entry.
The display returns to the previous screen.
13. Press the < > button once to display [Slow
Scan], and repeat steps 10 to 12.
Note: [Slow Scan] calibrates in the vertical direction.
14. When you are finished with the settings,
press the <Menu> button to return to the
print screen.
After changing the adjustment values, reprint the Color Registration Chart using the
procedure in "Printing the Color Registration Chart" (P. 165).
If the value is not "0" for each color, perform the color registration again.
Enter Adjustment
Fast Scan
Enter Adjustment
Slow Scan
To Next Page
Loading...
Need help?
General
