113 Printing Basics
Print Media Usage Guidelines
The printer tray accommodates most sizes and types of paper and other specialty media. Follow these
guidelines when loading paper and media in the tray:
• Envelopes can be printed from the multipurpose feeder (MPF) and priority sheet inserter (PSI).
• Fan paper or other specialty media before loading in the paper tray.
• Do not print on label stock once a label has been removed from a sheet.
• Use only paper envelopes. Do not use envelopes with windows, metal clasps, or adhesives with
release strips.
• Print all envelopes single-sided only.
• Some wrinkling and embossing may occur when printing envelopes.
• Do not overload the paper tray. Do not load print media above the fill line on the inside of the
paper width guides.
• Adjust the paper width guides to fit the paper size.
• If excessive jams occur, use paper or other media from a new package.
See also:
• "Loading Print Media in the Multipurpose Feeder (MPF)" on page 125
• "Loading Print Media in the Priority Sheet Inserter (PSI)" on page 134
• "Loading Envelope in the Multipurpose Feeder (MPF)" on page 129
• "Loading Envelope in the Priority Sheet Inserter (PSI)" on page 136
• "Printing on Custom Size Paper" on page 153
WARNING:
• Do not use conductive paper such as origami paper, carbonic paper or conductively-coated paper.
When paper jam occurs, it may cause short-circuit and eventually a fire accident.
To Next Page
Loading...
Need help?
General
