Printer Management Software 46
SimpleMonitor (Windows Only)
You can check the printer status with SimpleMonitor. Double-click the SimpleMonitor printer icon on
the taskbar at the bottom right of the screen. The Select Printer window appears, which displays the
printer name, printer connection ports, and printer status. Check the column Status to know the
current status of your printer.
Status Settings button: Displays the Status Settings screen and allows you to modify the
SimpleMonitor settings.
Click the name of the desired printer listed on the Select Printer window. The Status Monitor window
appears.
The Status Monitor window alerts you when there is a warning or when an error occurs, for example,
when a paper jam occurs or toner is running low.
By default, the Status Monitor window launches automatically when printing starts. You can specify
the conditions for starting the Status Monitor window in Auto start setup.
To change the pop-up settings for the Status Monitor window:
The following procedure uses Microsoft
®
Windows
®
XP as an example.
1 Click start → All Programs → Fuji Xerox → SimpleMonitor for Asia-Pacific → Activate
SimpleMonitor.
The Select Printer window appears.
2 Click Status Settings.
The Status Settings dialog box appears.
3 Select the Pop-up Settings tab, and then select the type of the pop-up from Auto start setup.
You can also check the toner level of your printer and the job information on the Status Monitor
window.
The SimpleMonitor is installed with your Fuji Xerox print driver.
To Next Page
Loading...
Need help?
General
