183 Using the Operator Panel Menus
Resetting to Factory Defaults
After executing Initialize NVM and rebooting the printer, all the menu parameters or data, except
the parameters for the network are reset to their factory default values.
1 Press the (Menu) button.
2 Select Admin Menu, and then press the
button.
3 Select Maintenance Mode, and then press the
button.
4 Select Initialize NVM, and then press the
button.
5 Ensure that Are you sure? appears, and then press the
button. The printer starts
initializing the Non-Volatile Memory (NVM).
6 When the Initialized. message appears, turn off and then on the printer to apply the
settings.
To Next Page
Loading...
Need help?
General
