To Next Page

To Previous Page

157 Printing Basics

 Printer Settings

This section includes:

• "Using the Operator Panel to Change the Printer Settings" on page 157

• "Using the Printer Setting Utility to Change the Printer Settings" on page 158

Using the Operator Panel to Change the Printer Settings

You can select menu items and corresponding values from the operator panel.

When you first enter the menus from the operator panel, you see an asterisk (*) next to a value in the

menus. This asterisk indicates the factory default menu setting. These settings are the original printer

settings.

NOTE:

• Factory defaults may vary for different countries.

When you select a new setting from the operator panel, an asterisk appears next to the setting to

identify it as the current user default menu setting.

These settings are active until new ones are selected or the factory defaults are restored.

To select a new value as a setting:

1 Press the (Menu) button.

2 Select Admin Menu, and then press the button.

3 Select the desired menu, and then press the button.

4 Select the desired menu or menu item, and then press the button.

• If the selection is a menu, the menu is opened and the first menu item in the menu appears.

• If the selection is a menu item, the default menu setting for the menu item appears.

Each menu item has a list of values for the menu item. A value can be:

• A phrase or word to describe a setting

• A numerical value that can be changed

• An On or Off setting

NOTE:

• Press the and button at the same time. This will display the factory default menu settings.

5 Select the desired value.

6 Press the button.

This enables the setting value, which is indicated by an asterisk (*) next to the setting value.

7 Press the (Back) or button to return to the previous menu.

To continue setting other items, select the desired menu. To quit setting new values, press the

(Menu) button to return to the main screen.

Driver settings may have precedence over changes previously made. In such case, change the

defaults of the operator panel.

Fuji Xerox DocuPrint CP205 User Manual

Questions and Answers: