77 Network Basics
• Gateway Address
When IPv6 is selected:
• Configure the following:
a Select Use Manual Address.
b Enter IP address of your printer.
c Enter the gateway address of your network.
When Dual Stack is selected:
Configure the IPv4 Settings and IPv6 Settings.
8 Click Next.
9 Ensure that the wireless settings are displayed, and then click Apply.
The Complete configuration screen appears.
10 Click Next.
11 Follow the instructions until the Check Setup screen appears.
12 Confirm there are no errors displayed on the LCD panel, and then click Start Installation.
If you see any errors, click Trouble Shooting Guide and follow the instruction.
13 If you agree to the terms of the License Agreement, click I accept the terms of the license
agreement to continue the installation process, and then click Next.
14 Check if the printer to be installed is listed in the Select Printer screen, and then click Next.
To Next Page
Loading...
Need help?
General
