Paper is Jammed at the Back of the
Machine
If the machine's control panel or the Status
Monitor indicates that there is a jam in the
back (Rear) of the machine, complete the
following:
1
Leave the machine turned on for 10
minutes. This allows the internal fan to
cool the extremely hot parts inside the
machine.
2
Open the back cover
.
3
Pull the blue tabs at the left and right
sides toward you to release the fusing
unit cover
.
WARNING
HOT SURFACE
The machine's internal parts will be extremely
hot. Wait for the machine to cool down before
touching them.
4
Use both hands to gently pull the
jammed paper out of the fusing unit.
54
To Next Page
Loading...
Need help?
General
