How to fix a FujiFilm FinePix S5200 that has no power?
If your FujiFilm Digital Camera won't turn on, try these steps: * Load new or fully charged batteries. * Plug the adapter back in. * Ensure the batteries are loaded in the correct direction. * Close the battery cover correctly. * Load the batteries or connect the AC power adapter, and wait a short time before turning the camera on.
Why do the batteries run out quickly on my FujiFilm FinePix S5200 Digital Camera?
If your FujiFilm Digital Camera batteries run out quickly: * Warm the batteries in your pocket before inserting them. * Wipe the battery terminals with a clean, dry cloth. * Load new or fully charged batteries. * Use the rechargeable battery discharging function to restore the rechargeable batteries to full capacity.
What to do if my FujiFilm FinePix S5200 Digital Camera doesn't take a photograph when the shutter button is pressed?
If your FujiFilm Digital Camera isn't taking photos when you press the shutter button: * Insert an xD-Picture Card. * Insert a new xD-Picture Card or erase unwanted frames. * Format the xD-Picture Card on the camera. * Wipe the xD-Picture Card contact area with a clean dry cloth. * Insert a new xD-Picture Card. * Turn the camera on. * Load new or fully charged batteries.
Why is the playback image dark on my FujiFilm FinePix S5200 even though the flash was used?
If your FujiFilm Digital Camera playback image is dark even when the flash was used, move closer to the subject within the flash range and hold the camera correctly.
How to fix a blurred image on a FujiFilm FinePix S5200 Digital Camera?
If the image from your FujiFilm Digital Camera is blurred: * Clean the lens. * Cancel Macro mode. * Select Macro mode. * Use AF/AE lock or “MF” Manual focus mode to take the picture.
What to do if my FujiFilm FinePix S5200 Digital Camera shows a COMMUNICATION ERROR?
If your FujiFilm Digital Camera displays 'COMMUNICATION ERROR', ensure the USB cable (mini-B) is correctly connected and that your printer is turned on.
What to do if my FujiFilm Digital Camera displays a PRINTER ERROR?
If your FujiFilm Digital Camera displays 'PRINTER ERROR', make sure the printer has paper and ink. If it does, try turning the printer off and then back on. For further assistance, consult the printer's user manual.
What to do if my FujiFilm FinePix S5200 displays PRINTER ERROR RESUME?
If your FujiFilm Digital Camera displays 'PRINTER ERROR RESUME?', ensure that the printer has paper and ink. If the message persists, press the “MENU/OK” button to restart printing.
Why can't I use the flash on my FujiFilm FinePix S5200 Digital Camera?
If you cannot use the flash on your FujiFilm Digital Camera: * Wait until charging is complete before pressing the shutter button. * Load new or fully charged batteries. * Change the Photography mode. * Set continuous shooting to “OFF”. * Select another flash mode, not the “v” Suppressed flash mode.
Why can't I pop up the flash on my FujiFilm FinePix S5200 Digital Camera?
If you cannot pop up the flash on your FujiFilm Digital Camera, try setting the flash mode to “d” Forced flash mode or another mode excluding the “v” Suppressed flash mode.
General| Sensor Type | CCD |
|---|---|
| Megapixels | 5.1 MP |
| Optical Zoom | 10x |
| Screen Size | 2.5 inches |
| Image Stabilization | No |
| ISO Range | 64 - 1600 |
| Video Resolution | 640 x 480 |
| Battery Type | 4x AA |
| Sensor Size | 1/2.5 inch |
| Image Resolution | 2592 x 1944 |
| ISO Sensitivity | Auto, 64, 100, 200, 400, 800, 1600 |
| LCD Screen Pixels | 115, 000 |
| Viewfinder | Electronic |
| Video Recording FPS | 30 fps |
| Effective Pixels | 5.1 MP |
| Lens | Fujinon |
| Focal Length | 6.3 - 63 mm |
| Aperture Range | f/2.8 - f/5.6 |
| Shutter Speed | 1/2000 sec |
| Storage Media | xD-Picture Card |
| Weight | 450 g |
To Next Page
