BIOS Recovery - Recovering System BIOS
28 - English A26361-D1562-Z121-1-6319
BIOS Recovery - Recovering System BIOS
i
All BIOS settings are reset to the default values.
Ê Open the casing as described in the operating manual.
Ê Set the switch for "Restore system BIOS" to ON.
Ê Close the casing as described in the operating manual.
Ê Insert a BIOS update floppy disk and start the PC.
Ê Note the signals issued from the loudspeaker. You have successfully restored the BIOS if you
hear the signal sequence "short-short- long- long- long" and the diskette access indicator is
dark. This can take a few minutes.
Ê Open the casing as described in the operating manual.
Ê Set the switch for "Restore system BIOS" to OFF.
Ê Close the casing as described in the operating manual.
Ê Remove the floppy disk from the drive.
Ê Start the PC and invoke BIOS Setup.
Ê Select the menu item Reset Configuration in the menu Advanced and change the setting to Yes.
Ê Save the change and terminate BIOS Setup.
The BIOS recovery has now been completed. The system restarts.
i
Detailed information on the BIOS recovery is contained in the manual "BIOS Setup"
("Drivers & Utilities" CD).
To Next Page
Loading...
Need help?
General
