Board Installation
Removing a memory module
1
1
► Push the clips on the right and left of the memory slot outward (1).
► Pull the memory module out of the memory slot (2).
i
When installing memory, a module may require a considerable amount of force to seat
properly, although this is very rare. To avoid bending and damaging your motherboard,
place it on its anti-static bag and onto a flat surface, and then proceed with memory
installation.
!
You must unplug the power connector to the motherboard before performing system
hardware changes, to avoid damaging the board or expansion device.
A26361-D1808-Z120-1-7619, edition 1 15
To Next Page
Loading...
Need help?
General
