Fujitsu 6240 - fi - Document Scanner

3.15 Scanning by Pressing the Scan Button on the Scanner
7. Click the [OK] button.
HINT
To link another button, perform steps 3 to 7 again.
8. Launch ScandAll PRO.
From the [Start] menu, select [All Programs]→[Fujitsu ScandAll PRO]→[Fujitsu ScandAll PRO], and then ScandAll PRO
starts up.
9. From the [Tool] menu, select [Preferences].
The [Setup] dialog box appears.
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/03/c03_15_01.htm (3 of 5)9/28/2007 2:39:12 PM