3. Select a color to drop out.
Red, Green, Blue Red, green, or blue is dropped out.
None No dropout occurs.
ATTENTION
● The Dropout Color setting can also be configured using the scanner driver setting
window. (The scanner driver setting window is given a priority over Software Operation
Panel.)
● When configuring the setting through Software Operation Panel, you cannot select other
colors than red, green, and blue. If you want to drop out any other colors, use the
scanner driver setting window.
For details on how to configure settings through the scanner driver setting window, see
Section "
3.7 Excluding a Color from Images (Dropout Color)."
All Rights Reserved. Copyright 2007 © PFU LIMITED
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/08/c08_06_01.htm (2 of 2)9/28/2007 2:38:56 PM
To Next Page
Loading...
Need help?
General