¢
Contents of function setting
Each function setting listed in this section is adjustable in accordance with the installation environ-
ment.
NOTE:
Setting will not be changed if invalid numbers or setting values are selected.
Function setting list
Function no. Functions
1) 00 Remote controller address setting
2) 11 Filter sign
3) 23 Vertical airflow direction range control
4) 30/31 Room temperature control for indoor unit sensor
5) 35/36 Room temperature control for wired remote controller sensor
6) 40 Auto restart
7) 42 Room temperature sensor switching
8) 43 Cold air prevention
9) 44 Remote controller custom code
10) 46 External input control
11) 49 Indoor unit fan control for energy saving for cooling
12) 60 Switching functions for external output terminal
1) Remote controller address setting
Multiple indoor units can be operated by using one wired remote controller.
Set the unit number of each indoor unit.
Function number Setting value Setting description Factory setting
00
00 Unit no. 0 ♦
01 Unit no. 1
02 Unit no. 2
03 Unit no. 3
04 Unit no. 4
05 Unit no. 5
06 Unit no. 6
07 Unit no. 7
08 Unit no. 8
09 Unit no. 9
10 Unit no. 10
11 Unit no. 11
12 Unit no. 12
13 Unit no. 13
14 Unit no. 14
15 Unit no. 15
NOTES:
• When connecting Polar 3-wired remote controller, set the remote controller address in the order
of 0, 1, 2, ....., and 15.
• When different type of indoor units (such as wall mounted type and cassette type, cassette type
and duct type, or other combinations) are connected using group control system, some func-
tions may no longer be available.
- 28 -
10-1. Function settings by using remote controller 10. Function settings
FLOOR TYPE
AGYG09-14KVCA
FLOOR TYPE
AGYG09-14KVCA
To Next Page
Loading...
