Fujitsu AOTG30LATL User Manual

En-11
4
For [Return time and temp. setting], select operation
mode with the [Cursor button (Up/Down)], and press the
[Enter button]. Adjust the value with the [Cursor button
(Up/Down)].
With the [Cursor button (Left/Right)], the cursor can be
switched [Time] and [Temp].
/
Set temp. auto return
Enable/Disable setting
Enable
Return time and temp. setting
Time Temp.
Cool/Dry
26
°
C
30min.
26
°
C
30min.
Heat
Mo 10:00
Air flow dire...
Set temp. range
OK:
Cancel:
To complete the setting, press the [Enter button]. To re-
turn to the “Function” screen, press the [Cancel button].
NOTES
• Thesettimecanbesetfrom30to120minutesinunitsof
10 minutes.
• Possibletemperaturesettingrangesintheoperationmode
areasfollows:
Cool, Dry .......................... 18to30°C(64to88°F)
Heat .................................. 16to30°C(60to88°F)
• Ifanyrangeshavebeensetin[Settemp.range]setting,
adjustable temperature range in this setting follows the
restricted range.
• Ifyousetanyrangesinthe[Settemp.range]settingafter
setting of [Set temp. auto return], the restricted range set in
the [Set temp. range] also overrides [Set temp. auto return]
setting.
• Evenifthetemperaturesettingchangeisdoneonthe
secondary remote controller, it returns to the set value in [Set
temp. auto return] on the primary remote controller.
When you return to the “Monitor” screen, the icon is displayed.
To check the function, press the [Enter button] and select the
icon with the [Cursor button (Left/Right)].
Cool
Monitor
High
°
C
24
Menu
Set temp. auto return: Remaining 30 minutes
Mo 10:00
End:
z
3-2-3. Set temp. range limitation setting
1
In “Function” screen, select [Set temp. range] with the
[Cursor button (Up/Down)].
Function
Air flow direction
Economy
Set temp. auto return
Set temp. range
Off
Disable
Timer
Mo 10:00
Disable
Setting:
Back:
To change the setting, press the [Enter button].
2
“Set temp. range” screen is displayed.
Set temp. range
Enable/Disable setting
Temp. setting
Cool/Dry
Heat
Auto
Lower
Upper
18
°
C
30
°
C
30
°
C
30
°
C
16
°
C
18
°
C
Disable
Mo 10:00
Setting:
Back:
Set temp. au...
Air flow dire...
Select the item with the [Cursor button (Up/Down)], and
press the [Enter button].
3
For [Enable/Disable setting], select [Enable] or [Disable]
with the [Cursor button (Up/Down)], and press the [Enter
button] to complete the setting.
Enable/Disable setting
Enable
Set temp. range
Temp. setting
Cool/Dry
Heat
Auto
Lower
Upper
18
°
C
30
°
C
30
°
C
30
°
C
16
°
C
18
°
C
Mo 10:00
OK:
Cancel:
Set temp. au...
Air flow dire...
4
For [Temp. setting], select mode with the [Cursor button
(Up/Down)] and press the [Enter button].
Adjust [Lower] and [Upper] value with the [Cursor button
(Up/Down)].
With the [Cursor button (Left/Right)], the cursor can be
switched [Lower] and [Upper].
To complete the setting, press the [Enter button].
Set temp. range
Enable/Disable setting
Temp. setting
Cool/Dry
Heat
Auto
Lower
Upper
18
°
C
30
°
C
30
°
C
30
°
C
16
°
C
18
°
C
Enable
Mo 10:00
Set temp. au...
Air flow dire...
OK:
Cancel:
9381067145_OM_EN.indd 11 14/09/2015 13:48:02

Fujitsu AOTG30LATL Specifications

General

Brand	Fujitsu
Model	AOTG30LATL
Category	Air Conditioner
Language	English