Fujitsu AOTG30LATL User Manual

En-24
z
5-3-3. Contrast setting
1
In “Screen” screen, select [Contrast] with the [Cursor
button (Left/Right)], and set with the [Cursor button (Up/
Down)].
30S
Screen
Automatic
off time
Brightness
Contrast
Mo 10:00
Date and time
Filter sign
Cancel:
OK:
NOTE
• Thesetisreectedwhilesettingit.
2
Other screen setting items can be set continually. To
complete the setting, press the [Enter button].
Screen returns to the “Submenu” screen.
5-4. Filter sign setting
NOTE
• Thisfunctioncanbeusedonlyifthesettingisactivatedin
the installation. To activate this function, consult authorized
service personnel.
In “Submenu” screen, select [Filter sign] with the [Cursor but-
ton (Up/Down)], and press the [Enter button].
Date and time
Monitor
Screen
Filter sign
R.C. sensor control
Room temp. display
Off
Off
Mo 10:00
Setting:
Back:
Submenu
[
1/2
]
“Filter sign” screen is displayed.
Screen
Display
Filter sign reset
Filter sign
Initial
Off
Mo 10:00
Setting:
Back:
z
5-4-1. Filter sign reset setting
Ifltersignicon
is displayed on the “Monitor” screen,
cleantheairlterontherelevantindoorunitrst,andthen
resettheltersignasfollows:
NOTE
• Beforeresettingtheltersignonthisremotecontroller,
cleantheairlterontherelevantindoorunit.Referto
"7. CLEANING AND CARE".
1
In the “Filter sign” screen, select [Filter sign reset] with the
[Cursor button (Up/Down)], and press the [Enter button].
Screen
Display
Filter sign reset
Filter sign
Initial
On
Mo 10:00
Setting:
Back:
Following screen is displayed.
The filter sign will be reset. OK?
No
Yes
2
Select [Yes] or [No] with the [Cursor button (Left/Right)],
and press the [Enter button].
 When[Yes]isselected,theltersignicononthedisplay
is turned off.
11
z
5-4-2. Display setting
Youcanselect[On](display)or[Off](non-display)forthelter
sign icon indication.
NOTE
• Whenyousetthissettingto[Off],theltersigniconwillnot
bedisplayedregardlessofthenecessityofltercleaningon
the indoor unit.
1
In the “Filter sign” screen, select [Display] with the [Cursor
button (Up/Down)], and press the [Enter button].
Following screen is displayed.
Screen
Display
Filter sign reset
Filter sign
Initial
Off
Mo 10:00
Setting:
Back:
9381067145_OM_EN.indd 24 14/09/2015 13:48:05

Fujitsu AOTG30LATL Specifications

General

Brand	Fujitsu
Model	AOTG30LATL
Category	Air Conditioner
Language	English