En-30
Lower case:
You can select and enter desired lower case
.
In “Lower case” screen, set the cursor to the target letter with
the [Cursor button], and press the [Enter button].
Selectedletterisdisplayedinthetexteld.
Name setting
(
Zone 1
)
a
b c d e f
g
h i
j
k
l
m
n
o p
q
r
s
t u v
w
x
y
z
&
( )
0
1 2 3 4 5 6 7 8
9
-
+
; :
.
,
/
_
Back Space End
Mo
10:00
Enter:
Cancel:
Capital
Preset names
Texteld
Preset names:
You can select and enter desired preset name
.
In “Preset names” screen, set the cursor to the target name
with the [Cursor button], and press the [Enter button].
Selectednameisdisplayedinthetexteld.
Name setting
(
Zone 1
)
Living
Back Space End
Dining
Study
Rumpus
Kitchen
Meals
Family
Bedroom
Lounge
Mo
10:00
Enter:
Cancel:
Lower case
Capital
Texteld
NOTE
• Maximumtextnumberyoucanenteris12characters
including a space. If you try to enter the 13th character,
message indicating that the entering text number is
exceedingisdisplayedinthetexteldasfollows:
(The 13th character is not displayed.)
Name setting
(
Zone 1
)
Over
Bedroom (Gue
a
b
c
d e
f
g
h
i
j
k
l
m
n
o p q
r
s
t
u
v
w
x
y
z
&
( )
0
1 2 3 4 5 6 7 8
9
-
+
; :
.
,
/
_
Space End
Mo
10:00
Enter:
Cancel:
Capital
Preset names
Back
4
Set the cursor to [End] with the [Cursor button], and
pressthe[Enterbutton]tonalizethenameregistration.
Screen returns to the
“Name setting” screen, and regis-
tered name is displayed.
6. DEMAND RESPONSE AND
INDOOR UNIT OPERATION
This product is designed to be compatible with Air Conditioning
Demand Response program.
To utilize the function, you need a separate arrangement with
your electricity supplier. Please check availability in the place
of use.
When your electricity supplier activates one of the following 3
Demand Response (DR) modes, the air conditioner switches
over to the appropriate operation. If the optional IR receiver
is installed, operation indicators will inform you when the unit
has entered the DR mode.
For detailed information on indicator patterns, please refer to
the operation manual included in the IR receiver kit.
DR mode Description of operation in this mode
DR mode 1 Compressor off.
DR mode 2
The air conditioner continues to cool or heat
during the Demand Response event, but
the electrical energy consumed by the air
conditioner in a half hour period is not more
than 50% of the total electrical energy that
would be consumed if operating at the rated
capacity in a half hour period.
DR mode 3
The air conditioner continues to cool or heat
during the Demand Response event, but
the electrical energy consumed by the air
conditioner in a half hour period is not more
than 75% of the total electrical energy that
would be consumed if operating at the rated
capacity in a half hour period.
When the unit enters the DR mode, it performs moderate
operation so the cooling or heating effect may be reduced.
You cannot override this function by changing the temperature
setting using the remote controller or other actions unless the
unitnishesthefunction.
NOTE
• Stoppingtheoperationoftheairconditionerbyusingthe
remote controller or by OFF timer are valid in DR mode.
If the timer operation is interfered by an interruption of
power supply such as a blackout and the power supply is
resumed, no indication of the DR mode is performed.
DuringtheDRmode,noindicationof"ltersign"is
performed.
Whentheunitnishesthefunction,itwillperformtheoperation
that was previously performed before entering the DR mode.
If you have operational issues, contact your electricity supplier
rsttocheckwhethertheyareactivatinganyoftheDRmode
described above.
If the air conditioner is under demand controlling, consult the
issues with your electricity supplier.
If they are not demand controlling the air conditioner, refer to your
warranty card for the contact details of Fujitsu General (AUST.)
PTYLIMITEDorvisitourwebsite:www.fujitsugeneral.com.au
9381067145_OM_EN.indd 30 14/09/2015 13:48:07
To Next Page
Loading...
Need help?
General
