Fujitsu AOTG30LATL User Manual

En-12
NOTES
• Possible temperature setting ranges in the operation mode
areasfollows:
Cool, Dry, Auto ................ 18to30°C(64to88°F)
Heat ................................. 16to30°C(60to88°F)
• IfthetemperatureoutoftheSettemp.rangelimitationis
set, it will be reset at the nearest temperature within the
range.
• Evenifthetemperaturesettingchangeisdoneonthe
secondary remote controller, it returns to temperature within
the range set in [Set temp. range] on the primary remote
controller.
When you return to the “Monitor” screen, the icon is displayed.
To check the function, press the [Enter button] and select the
icon with the [Cursor button (Left/Right)].
Menu
Cool
Monitor
Mo 10:00
High
°
C
26
Set temp. range
End :
4. TIMER SETTING
4-1. Switching to the “Timer” screen
1
In “Menu” screen, select [Timer] with the [Cursor button
(Up/Down)], and press the [Enter button].
Menu
Function
Timer
Submenu
Mo 10:00
Setting:
Back:
2
“Timer” screen is displayed. To return to the “Menu”
screen, press the [Cancel button].
Function
Timer
On timer
Off timer
Weekly timer
Auto-off timer
Disable
Disable
Disable
Mo 10:00
Disable
Setting:
Back:
4-2. Timer setting items
z
4-2-1. On timer setting
1
In “Timer” screen, select [On timer] with the [Cursor
button (Up/Down)], and press the [Enter button].
Function
Timer
On timer
Off timer
Weekly timer
Auto-off timer
Disable
Disable
Disable
Mo 10:00
Disable
Setting:
Back:
2
“On timer” screen is displayed.
On timer
Enable/Disable setting
Time setting
Disable
0.5 hour later
Mo 10:00
Auto-off timer
Off timer
Setting:
Back:
To change the setting, select the item with the [Cursor
button (Up/Down)], and press the [Enter button].
3
For [Enable/Disable setting], select [Enable] or [Disable]
with the [Cursor button (Up/Down)], and press the [Enter
button] to complete the setting.
On timer
Enable/Disable setting
Time setting
Enable
0.5 hour later
Mo 10:00
Auto-off timer
Off timer
OK:
Cancel:
4
For [Time setting], adjust the time with the [Cursor button
(Up/Down)], and press the [Enter button] to complete the
setting.
On timer
Enable/Disable setting
Time setting
Enable
hour later
Mo 10:00
Auto-off timer
Off timer
OK:
Cancel:
6.0
NOTE
• The[Timesetting]canbesetupto24hoursinunitsof30
minutes.
9381067145_OM_EN.indd 12 14/09/2015 13:48:02

Fujitsu AOTG30LATL Specifications

General

Brand	Fujitsu
Model	AOTG30LATL
Category	Air Conditioner
Language	English