To Next Page

To Previous Page

3) Room temperature control for indoor unit sensor

Depending on the installed environment, correction of the room temperature sensor may be re-

quired. Select the appropriate control setting according to the installed environment.

The temperature correction values show the difference from the Standard setting "00" (manufactur-

er’s recommended value).

Function number Setting value Setting description

Factory

setting

(For cooling)

(For heating)

00 Standard setting ♦

01 No correction 0.0 °F (0.0 °C)

02 -1 °F (-0.5 °C)

More cooling

Less heating

03 -2 °F (-1.0 °C)

04 -3 °F (-1.5 °C)

05 -4 °F (-2.0 °C)

06 -5 °F (-2.5 °C)

07 -6 °F (-3.0 °C)

08 -7 °F (-3.5 °C)

09 -8 °F (-4.0 °C)

10 +1 °F (+0.5 °C)

Less cooling

More heating

11 +2 °F (+1.0 °C)

12 +3 °F (+1.5 °C)

13 +4 °F (+2.0 °C)

14 +5 °F (+2.5 °C)

15 +6 °F (+3.0 °C)

16 +7 °F (+3.5 °C)

17 +8 °F (+4.0 °C)

4) Room temperature control for wired remote controller sensor

Depending on the installed environment, correction of the wire remote temperature sensor may be

required. Select the appropriate control setting according to the installed environment.

To change this setting, set Function 42 to Both “01”.

Ensure that the Thermo Sensor icon is displayed on the remote controller screen.