03-24
• Operation status
*: This status follows the configuration on function setting 49.
•0: Setting airflow (When comp. on)
•1: Intermittent S-Lo (On: 1 minute and off: 3 minutes)
•2: Remote controller setting (Either of 0 or 1)
Outdoor temp. < Indoor temp. : On
Set temp. + 0.9°F (+ 0.5°C)
Set temp. - 0.9°F (- 0.5°C)
Outdoor temp. > Indoor temp. : Off
Off
Off
Off
On
On
On
Signal detected by
external controller
[Mechanical cooling Off]
(EXT.IN2)
Cooling thermostat On
(EXT.OUT)
Mechanical cooling
Fan (49-01)
Indoor
unit
Indoor
temp.
*
To Next Page
Loading...
