Fujitsu AOU30RLXEH User Manual

1-00. ERROR HISTORY MODE
•
In this mode, the history of abnormality that occurred in the past can be confirmed.
( Table : 35 Procedure for history mode )
Procedure Operation
Power
Mode
1
2
3
4
During status display, press the MODE SWITCH 2 times.
(Status display : Outdoor unit is stopping and no error)
When the EXIT SWITCH is pressed, this mode
ends and returns to the
status display .
Selecting display items can be done by pressingthe
SELECT SWITCH. (Return to Procedure 3)
Press the ENTER SWITCH, Error code is displayed by
lighting LED. (Refer to TROUBLESHOOTING)
When the POWER / MODE LED blinking 2 ti
mes,
press the ENTER SWITCH.
: Light ON: Light OFF : Blinking 2 : 2 Times Blinking
n : n Times Blinking
1-33-3 Error history mode
Error L1 L2 L6L5L4L3
2
2
2
2
2
5
Press the SELECT SWITCH and adjust to DISPLAY ITEM
(from L1 to L3) that you want to confirm. (Refer to Table : 36)

n n
DATA
LED
Power / Mode
LED
Display Item
ERROR
L1 L2 L3
( Table 36 : Display pattern )
: Light ON: Light OFF n : n Time Blinking
: Blinking
Newest error code
Error code before 1 time
Error Code
2
Error code before 2 times
01-31

Fujitsu AOU30RLXEH Specifications

General

Brand	Fujitsu
Model	AOU30RLXEH
Category	Air Conditioner
Language	English