To Next Page

To Previous Page

4) Auto restart

Enables or disables automatic restart after a power interruption.

Function number Setting value Setting description Factory setting

00 Enable ♦

01 Disable

NOTE: Auto restart is an emergency function such as for power outage etc. Do not attempt to

use this function in normal operation. Be sure to operate the unit by remote controller or

external device.

5) Remote controller custom code

(Only for wireless remote controller)

The indoor unit custom code can be changed. Select the appropriate custom code.

Function number Setting value Setting description Factory setting

00 A ♦

01 B

02 C

03 D

6) Indoor unit fan control for energy saving for cooling

Enables or disables the power-saving function by controlling the indoor unit fan rotation when the

outdoor unit is stopped during cooling operation.

Function number Setting value Setting description Factory setting

00 Disable

01 Enable ♦

00: When the outdoor unit is stopped, the indoor unit fan operates continuously following the set-

ting on the remote controller.

01: When the outdoor unit is stopped, the indoor unit fan operates intermittently at a very low

speed.

DESIGN & TECHNICAL MANUAL

- 20 -

WALL MOUNTED

ASYG07-12LLCE

Fujitsu AOYG09LLCE Design & Technical Manual

Other manuals for Fujitsu AOYG09LLCE