03-04
Indoor unit fan control for energy saving for cooling
Enables or disables the power-saving function by controlling the indoor unit fan rotation when the
outdoor unit is stopped during cooling operation.
00: When the outdoor unit is stopped, the indoor unit fan operates continuously following the setting
on the remote controller.
01: When the outdoor unit is stopped, the indoor unit fan operates intermittently at a very low speed.
02: Enable or disable this function by remote controller setting.
• W
As the factory setting, this setting is initially invalidated.
hen connecting VRF system using network converter, this setting must be set to "00" or "01".
Function number Setting value Setting description Factory setting
49
elbasiD00
elbanE10
rellortnoc etomeR20 ♦
To Next Page
Loading...
Need help?
General
