Fujitsu ASYG14KMTA User Manual

03-01
3-1. FUNCTION SETTING
3-1-1 INDOOR UNIT
Remote controller address setting
Filter sign
* Because this setting is normally done automatically when 2-wire-type wired remote controller
is installed, setting is unnecessary.
Multiple indoor units can be operated by using one wired remote controller.
Set the unit number of each indoor unit.
*When connecting Polar 3-core wired remote controller, set the remote controller address
in the order of 0, 1, 2, ......, and 15.
Select appropriate intervals for displaying the filter sign on the indoor unit according to the
estimated amount of dust in the air of the room.
If the indication is not required, select “No indication” (03).
*When cdifferent type of indoor units (such as wall-mounted type and cassette type, cassette
type and duct type, or other combinations) are connected using group control system, some
functions may no longer be available.
Setting Description
Function Number Setting Value
Standard (400 hours)
Long interval (1,000 hours)
Short interval (200 hours)
No indication
11
00
01
02
03
Unit no.0
Unit no.1
Unit no.2
Unit no.3
Unit no.4
Unit no.5
Unit no.6
Unit no.7
Unit no.8
Unit no.9
Unit no.10
Unit no.11
Unit no.12
Unit no.13
Unit no.14
Unit no.15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
00
setting Description
15
00
Setting Value
Function
Number
Factory
setting
Factory setting

Fujitsu ASYG14KMTA Specifications

General

Brand	Fujitsu
Model	ASYG14KMTA
Category	Air Conditioner
Language	English