Remove the 3 mounting screws
and codes.
Remove the mounting screw
and code.
Remove the connectors
and spacers.
Remove the 2 mounting screws
and codes.
HEAT SINKER(20g) 0000036795
Service Parts No.
Parts Name
Remove the 2 mounting screws.
Note the tightening torque at the installation.
Tightening torque is as follows.
- Temporary tightening : 0.3 +0.2N m
- Final tightening : 2.7 +0.2N m
7. Inverter PCB removal
Compound
06-06
Inverter PCB
Screws
(For INV comp.)
Screws
(For IPM)
IPM
Screws
(For Magnetic relay)
Spacers
(5 places)
Screws
(For capacitor)
-
-
.
.
Spread the heat dissipation compound on the other side of IPM
when you exchange Inverter PCB by the repair.
AJ*072/ 090LALBH, AJ*072/ 090LATBH
To Next Page
Loading...
