06-09
Remove the 7 mounting screws.
Remove the 2 mounting screws.
Remove the 6 mounting screws. Open the Control Box with handle.
Loose or remove the cable ties.
(3 places)
Remove the locking stopper
of edging saddle.(3 places)
Remove the wires from edging saddle.
(3 places)
Remove the Wire plate
by sliding rightward.
Remove the PANEL BTM
by sliding toward.
9. PANEL BTM removal
10. Control Box open
Screws (7 places)
Screws (2 places)
Screws
(6 places)
Handle
Hook (3 places)
To Next Page
Loading...
