EasyManua.ls Logo

Fujitsu celvin nas - Technical Data

Fujitsu celvin nas
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical data
Fujitsu 59
Technical data
Q802 Q902
CPU Intel® Atom™ D27xx
RAM 1 GB DDRIII 2 GB DDRIII
Flash memory 1 GB (USB DOM)
Hard disk
up to 4 x SATA 6G hard disks
(hot-swappable and lockable)
up to 6 x SATA 6G hard disks
(hot-swappable and lockable)
Network 2 x Gigabit RJ-45 network connector (Intel 82574L NIC)
LEDs
Status, LAN, USB, eSATA, HDD1,
HDD2, HDD3, HDD4
Operation, Status, LAN, USB, eSATA,
HDD1, HDD2, HDD3, HDD4, HDD5,
HDD6
Buttons Switch-on button, copy button, configuration reset button
USB
5 x USB 2.0 ports (front: 1, rear: 4)
2 x USB 3.0 ports (rear:
Supports USB printer, USB storage and control of uninterrupted power
supply over USB.
eSATA 2 x eSATA 3G
VGA For console management (reserved for maintenance)
HDMI V1.3a (reserved)
Dimensions 177 x 180 x 235 mm (H x W x D) 175 x 257 x 235 mm (H x W x D)
Weight 3.65 kg (net), 4.65 kg (gross) 5.2 kg (net), 6.5 kg (gross)
Operating temperature 0~40 °C
Humidity 0~80 %
Power supply Input: 100-240 V ~ / 3.5 A, 47 Hz - 63 Hz
Output: +3.3 V / 6 A, +5 VSB / 2 A
Max power: +5 V / 12 A, -12 V / 0.5 A
250 W: +12 V / 17 A
Anti-theft device Security Lock
Fan 1 x low-noise fan for power supply
1 x low-noise fan for hard disks and
PCB
1 x low-noise fan for power supply
2 x low-noise fan for hard disks and
PCB

Related product manuals