System expansions
62 Fujitsu Technology Solutions
Installing the floppy disk drive
1
2
2
► Push the drive into the casing in the direction of the arrow (1).
► Fold up the drive cage (see "
Folding up the drive cage").
► Fasten the floppy disk drive with the screws (2).
► Connect the cables.
► Fold down the drive cage (see "
Folding down the drive cage").
► Replace the cross piece (see "
Installing the cross-piece").
► Close the casing (see "
Closing the casing").
i
It may be necessary to modify the entry for the drive in the BIOS Setup.
To Next Page
Loading...
