EasyManua.ls Logo

Fujitsu ESPRIMO X913 - User Manual

Fujitsu ESPRIMO X913
65 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
System
Operating Manual
ESPRIMO X913 / X913-T
FUTRO X913 / X913-T

Table of Contents

Other manuals for Fujitsu ESPRIMO X913

Preview: Quick Start Guide
Quick Start Guide2 pages

Questions and Answers

  • S
    Steven MooreAug 17, 2025
    How to fix a Fujitsu Desktop when the power indicator is off?
    • C
      Carolyn GomezAug 17, 2025
      If the power-on indicator on your Fujitsu Desktop remains unlit after switching it on, it could be due to a faulty mains voltage supply. Ensure the power cable is properly plugged into both the device and the mains socket. Alternatively, the internal power supply might be overloaded. In this case, unplug the device from the mains socket, wait approximately 3 minutes, then plug it back in and switch the device on.
  • C
    Craig BowmanAug 20, 2025
    What to do if my Fujitsu ESPRIMO X913 Desktop monitor remains blank?
    • M
      Mary WilliamsAug 20, 2025
      If your Fujitsu Desktop monitor remains blank, first check if power saving mode is activated. Press any key on the keyboard, deactivate the screen saver, or adjust the brightness and contrast. If that doesn't work, ensure the brightness control isn't set too low. If the issue persists, restart the device, press F8 during boot, start in protected mode, and set the correct value for the connected monitor as described in its operating instructions. Also, check the ambient temperature, as a darker screen can indicate inadequate heat dissipation, especially in passively cooled systems like the FUTRO X913/X913-T. If a 'Frequency out of range' message appears, adjust the video frequency range or screen resolution using your computer software.
  • M
    martinezalanAug 22, 2025
    Why is my external monitor blank on my Fujitsu ESPRIMO X913 Desktop?
    • D
      Dale KeithAug 22, 2025
      If the external monitor connected to your Fujitsu Desktop remains blank, first ensure that the monitor is switched on and that its brightness is properly adjusted. If power saving mode is active, pressing any key should restore the display. If the screen output is set to the system’s LCD monitor, use the appropriate key combination to switch the screen output. Also, verify that the power and data cables are securely connected to both the system and the monitor. If connections are loose, switch off the external monitor and the system, check and properly connect the cables, and then switch them back on.
  • A
    ashleycamposAug 26, 2025
    Why is my Fujitsu ESPRIMO X913's external monitor blank or unstable?
    • K
      Karen IbarraAug 26, 2025
      If the external monitor connected to your Fujitsu Desktop is blank or the image is unstable, it might be due to an incorrect monitor selection or screen resolution setting within the application program. Terminate the program by pressing Alt + F4. If the issue continues, switch to the system's LCD monitor using the appropriate key combination and adjust the screen resolution as described in your operating system's documentation.
  • W
    Wendy WarrenAug 28, 2025
    What to do if my Fujitsu ESPRIMO X913 Desktop won't switch off?
    • D
      danielle74Aug 28, 2025
      If your Fujitsu Desktop cannot be switched off using the ON/OFF switch due to a system crash, keep the power button pressed for at least 4 seconds. Be aware that this can lead to data loss, as it doesn't allow the operating system to shut down properly, and error messages may appear upon the next system start.
  • N
    Nicholas SuarezAug 31, 2025
    How to restore mouse pointer on Fujitsu Desktop?
    • T
      Travis RomeroAug 31, 2025
      If no mouse pointer is displayed on the screen of your Fujitsu Desktop, ensure the mouse is correctly connected. Properly shut down the operating system, switch off the device, and check the mouse cable connections to the system unit, including any adapters or extension leads. Make sure only one mouse is connected before switching the device back on.
  • D
    David PearsonSep 3, 2025
    How to correct the time on my Fujitsu ESPRIMO X913 Desktop?
    • T
      Teresa JoyceSep 3, 2025
      If the time and/or date is not correct on your Fujitsu Desktop, set the correct time and date within the operating system or in the BIOS Setup.
  • C
    Cynthia KnightSep 5, 2025
    What to do if Fujitsu ESPRIMO X913 Desktop doesn't recognize SmartCard?
    • K
      Kenneth JimenezSep 5, 2025
      If your Fujitsu Desktop's SmartCard reader does not recognize the card, ensure the SmartCard is inserted correctly with the chip facing upwards. Also, verify that the SmartCard complies with the ISO standard 7816-1, -2, -3, and -4.
  • R
    Robert AndersonSep 8, 2025
    What to do if I forgot my Fujitsu Desktop SmartCard PIN?
    • A
      amber29Sep 8, 2025
      If you have forgotten the PIN for your SmartCard on your Fujitsu Desktop and are working in a network, contact your system administrator. They can unlock your system using a Supervisor PIN.
  • T
    tarawrightSep 12, 2025
    What to do if I lost my Fujitsu ESPRIMO X913 Desktop SmartCard?
    • M
      Melissa LucasSep 12, 2025
      If you have lost your SmartCard for your Fujitsu Desktop and are working in a network, contact your system administrator, who can boot your system with a Supervisor SmartCard.

Summary

Important Notes and Safety

General Safety Precautions

Provides essential safety precautions for operating the device.

System-Specific Safety Guidelines

Outlines critical safety guidelines specific to the system's operation.

Getting Started: Initial Setup

Unpacking and Delivery Verification

Steps for receiving and verifying the device package contents.

Initial Setup Procedures

Outlines the basic steps for setting up the device for first use.

First-Time Power-On and Software Installation

Crucial steps for initial power-on and software setup.

Operation and Configuration

BIOS Setup Utility Guide

Comprehensive guide to accessing and configuring BIOS settings.

Security Features and SmartCard Usage

Covers data protection, security locks, BIOS security, and SmartCard reader.

Troubleshooting and Tips

General Problem Resolution

Steps for diagnosing and resolving common operational issues.

Specific Troubleshooting Scenarios

Solutions for issues like power failure, display problems, and device responsiveness.

SmartCard and System Errors

Fujitsu ESPRIMO X913 Specifications

General IconGeneral
BrandFujitsu
ModelESPRIMO X913
CategoryDesktop
LanguageEnglish

Related product manuals