Fujitsu ESPRIMO X913 - Explanatory Information about Standard ISO 9241-307

Important notes
Explanatory information about standard ISO 9241-307
Permanently unlit or lit pixels
Today’s production techniques cannot guarantee an abs olutely fault-free screen display. Depending
on the total numb er of pixels (resolution), there may be a few constantly lit or unlit pixels or subpixels.
Pixel
A pixel consists of 3 subpixe
ls, normally red, green and blue. A pixel is
the smallest elemen t that
can be generated by c omplete functionality of
the display.
Subpixel
A subpixel is a separatel
y addressable internal structure within a pixel that
enhances the pixel func
tion.
The maximum permitted number of faulty pixels is stipulated in the international standard ISO
9241-307. In accordance with standard I SO 9241-3, LCD displays by Fujitsu comply with C lass II
for low resolutions and Class I for resolutions of 1680 x 1050 (1764000 pixel) and higher.
Examples:
A flat-scre en monitor w ith a resolution of 1280 x 102 4 has 1280 x 1024 = 1310720 pixels. Each pixel
consists of three subpixels (red, green and blue), so there are almost 3.9 million sub pixels in total.
According to ISO 9241-3 (Class II), a maximum o f 3 lit and 3 unlit pixels plus 7 lit or 13 unlit subpixels,
or a corresponding combination, may be faulty (1 lit subpixel counts as two unlit subpixels).
A flat-scre en monitor w ith a resolution of 1920 x 108 0 has 1920 x 1080 = 2073600 pixels. Each pixel
consists of three subpixels (red, green and blue), so there are almost 6.2 million sub pixels in total.
According to ISO 9241-3 (Class I), a maximum o f 2 lit and 2 unlit pixels plus 5 lit or 10 unlit subpixels,
or a corresponding combination, may be faulty (1 lit subpixel counts as two unlit subpixels).
Fujitsu 15