Service Manual ESPRIMO Q5020 page 11 of 13
Title:
Service Manual ESPRIMO Q5020
Target Audience: FTS Support and Service Partner
Organizations
Published by:
Fujitsu
Service and Support Center
Product Service Management Business PC
Joerg Reichelt
Service Manual ESPRIMO Q5020 V1.0.doc
Version: Page/Pages: http://extranet.ts.fujitsu.com/service/ Fujitsu Technology Solutions GmbH
2008
1.0 11 of 13
9. Closing of the cabinet
• Check correct wiring and the
connectors before the cabinet
is being closed (red circles).
• The cable marked with the
red arrow. has to be fixed in
the plastic bracket as seen
in th picture.
• Carefully put the top cover module on
the base unit in horizontal orientation.
• Take care of a parallel alignment of the
top cover to the base unit.
• Ensure that the USB and the On/Off
cable are not being trapped and
squeezed.
• While pressing down look at the correct
position of the rear panel and the cover.
• After closing of the cabinet check again
that the rear panel fits correctly.
To Next Page
Loading...
