|Controllers|
a) Select Storage > Volumes. If current owner and preferred owner are not listed select All volumes
> Columns > .Select current owner and preferred owner then recheck to verify that volumes are
distributed to their perferred owners.
b) If volumes are all owned by preferred owner continue to Step 6.
c) If none of the volumes are returned, you must manually return the volumes. Go to Storage > Volumes >
More > Redistribute volumes.
d) If only some of the volumes are returned to their preferred owners after auto-distribution or manual
distribution you must check the recovery guru for host connectivity issues.
e) If there is no recovery guru present or if following the recovery guru steps the volumes are still not
returned to their preferred owners contact support.
6. Collect support data for your storage array using SANtricity System Manager.
a. Select Support > Support Center > Diagnostics.
b. Select Collect Support Data.
c. Click Collect.
The file is saved in the Downloads folder for your browser with the name support-data.7z.
Results
Your controller replacement is complete. You can resume normal operations.
25
To Next Page
Loading...
